Delton PC-80D Instrukcja Użytkownika Pobierz pdf (Strona 11)

User Manual for PC-80D Easy ECG Monitor

Note: Keep at ease and make sure the skin contact well with the electrodes during ECG measurement. Please place the device on correct position, do

not shake it during the measurement. Dirty skin may cause poor signal quality, so clean your skin before measuring.

2). Leg Measurement

The ECG waveform detected by Leg Measurement is equivalent to Lead II of regular ECG examination. Keep at ease when

seating down, and then lift your left leg on a bench. Hold the device with the right hand when measuring and make sure that

the fingers touch the metal electrode II and III reliably, place the electrode I on the left leg above the ankle, as shown in

figure 4-3.

Note: Keep at ease and make sure the skin is clean and moist before measuring.

3). Chest Measurement

It is recommended to take ECG measurement on chest, since the signal detected by this way is stronger and with less

interference. The ECG waveform detected by Chest Measurement is similar to the Lead V4 or V5 of regular ECG

examination. Hold the device with the right hand, make sure that the fingers touch the metal electrode II and III

reliably, as shown in figure 4-4, place the electrode I on the left chest align with the midclavicular line (V4 position) or the

anterior axillary line(V5 position) and on the level of the 5

intercostal space.

Note: keep at ease and clean the electrode I by using the wet cloth before measuring. If the waveform baseline wanders or

noisy waveform appears, hold your breath for a moment to get stable and clean signal.

2. Measurement by external lead wires

The ECG signal which is detected by external lead wires is more stable than that by hand measurement. ECG

measurement by external lead wires can be done by placing the electrodes on limbs or chest respectively.

1). Electrodes placement on limbs

On default menu screen enter “ ” option setup menu to select “limb lead” for signal input. By this way, the 3 channels of

limb lead I, II and III can be measured and displayed simultaneously and continuously. Either adhesive electrodes or limb clip

type electrodes (optional) can be used to do the measurement. The location of the electrodes is shown in figure 4-5.

R (red): place on interior of right arm (between the wrist and the elbow);

L (yellow): place on interior of the left arm (between the wrist and the elbow);

F (green): place on interior of the left leg (between the knee and the ankle);

N (black): place on interior of the right leg (between the knee and the ankle)

Figure 4-4 Chest measurement

Figure 4-3 Leg measurement

Figure 4-5 the location of electrodes on limbs

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 38 39

Brak uwag

Delton PC-80D Instrukcja Użytkownika Strona 11